How to Make Painting Your Skirting Boards a Lot Easier

If you get the need to refresh your home’s interior decor and give it a modern look, you don’t need to buy fresh furniture or knick-knacks to achieve the look you want. More often than not, simply applying a fresh coat of paint to your walls and skirting boards. Painting the walls can be simple enough, but that may be a little more difficult in the case of painting skirting boards. Get more info about Perth Skirting Boards Painting.

That doesn’t say it can’t be achieved though. There are options to render skirting boards a lot simpler to color. So long as you have the correct tools and train yourself for the job, you will have it finished without much preparation and with no time.

Make plans to paint the skirting boards

Preparation is an important step toward any chore, not just with baseboard painting. The preparation step would involve getting the right materials for the job and putting in place some things that will prevent botching of your painting work.

Of course you will require paints and brushes to get the painting job finished. You can get latex paint as this form of paint dries better and is long lasting against scratching and scuffing. Even, if the old paint is oil-based on the baseboards, the new paint you will choose will be oil-based too. The basic explanation for this is because oil and water are not combined. When you’re purchasing water soluble color, then you’ll need to polish and prime the baseboards.

As for the paints, painting pads may be used in lieu of rollers or paints. Some painting pads are built for skirting boards and pads can allow you to paint your baseboards with a single stroke instead of several, resulting in a painting that is more uniform.

Cover the Skirting Boards before you color

Another trick that will make things even simpler to paint your skirting boards is to cover the wall and floor first before painting begins. By that way you can stop damage on the wall and floor when adding smudges, thereby having the paint job appear dirty and sticky.

This job may be accomplished by using ordinary masking tape, but it is suggested that you buy a specialized tape from the hardware store. A normal masking tape will rip the walls from the ground or make scuff marks on the tile. Apply the tape neatly to the space where the wall meets your baseboard. To cover the board, lay and tightly place a sheet of plastic around the work space. Make sure the area in which the baseboard edge meets the floor is completely covered.

Painting your skirting boards can be a messy job but with the right tools and preparation, you can simplify the job. You should step back after the job is finished and enjoy your progress on sprucing up your skirting boards.